Brake Caliper Paint for Car
Brake caliper paint – It is not a simple task and not too complicated, but requires considerable time and minimal knowledge of mechanics. We will detail below the steps to follow.
First: Loosen the nuts of each wheel while the car is on the ground. Second: If you have an elevator to climb the best car. But you can do it with a cat, lifting each wheel. Third Remove the screws on each wheel and remove them from the car. It will expose the brake caliper paint and pads. Then we remove the clamps to replace the pads and thoroughly clean all dirt, rust, brake and accumulated land. For best results we should use a steel brush for the most soiled parts. Once removed the clamps extract pills old and worn brake. To return the brake piston to its place of origin, so you can assemble the new pads, use a tool called Repositioning brake piston.
Fourth: after clean and dry the brake caliper paint to proceed with antirust paint brush, if possible temperature resistant. So they stayed after paint with rust converter then wait for the drying time and give another hand for best results. Fifth: We shall now proceed to paint. For the choice of paint must consider several factors: that is resistant to washing, scratching and, if possible, to temperaturePopular search terms: copper caliper paint, car and caliper drum paint