How to Paint Kitchen Cabinets
Paint kitchen cabinets – First, remove the handle from the cabinet, unscrew any hinges and pull all the drawers. The doors and drawers are easier to paint if they are removed. Sand all cabinet surfaces with 220-grit aluminum oxide sandpaper. Existing cabinets often feature glossy paint and polyurethane finish. These smart surfaces do not accept new paint, unless they are gross bit with sandpaper up. A 220-sandpaper is medium gravel, so it is not rough enough to make the surface overly scratchy, but it’s not so fine that it cannot cut through the gloss.
Next steps to paint kitchen cabinets are use painter’s tape to any nearby objects. Even with doors and drawers removed, the majority of your cabinet still is installed and positioned near appliances or wall surfaces. Tape shields these surfaces against accidental brush strokes. Then, prime the surfaces with an oil-base primer. Use a brush to tight corners and a roller for larger surfaces Wait primer to dry.
Place the red oil-base-gloss or semi-gloss paint to cabinet with a clean brush and roller. Paint with a shiny gloss works best for kitchen cabinets, because it dries down easier cleanup. Next, mal a second or third layer as needed, after the first layer dries. Set the computer hardware and remove the painter’s tape after the last layer is dried for a full 24 hours. The paint will be dry long before a whole day, but the finish will last longer if your let it sit and harden for 24 hours before the surface. Your paint kitchen cabinets were done.